Msg=The tool data base must be rebuilt. This may take a few minutes. Click OK to continue.
[Brushes]
Count=88
[0]
ID=-1
Name=<Tool Not Found>
Info=<Tool Not Found> is a debugging device and should never be seen by the user. It must be kept as tool 0.
Help=-1
Width=39
Tip=8
[1]
ID=6
Name=Basic Spraycan
Info=The Basic Spraycan sprays lines whose paint builds up if you hold the tool over the same area. The lines have soft edges. Paper type is ignored.
Help=7854
Width=35
Tip=4
FlowRate=100
Pressure=50
Trans=40
DynTrans=2
RandomTexture=1
[2]
ID=6
Name=Graffiti
Info=The Graffiti Spraycan sprays lines whose paint builds up if you hold the tool over the same area. Press the tool over an area and graffiti-like drips appear. Paper type is ignored.
Help=7854
Width=25
Tip=4
FlowRate=100
Pressure=50
Trans=40
DynTrans=2
Drip=50
RandomTexture=1
[3]
ID=6
Name=Splatter
Info=The Splatter Spraycan sprays dots of color that build up if you hold the tool over the same area. Use this tool type to add texture to a 24 bit, 256 color, or gray scale picture. Paper type is ignored.
Help=7854
Width=40
Method=11
FlowRate=100
Splatter=1
[4]
ID=6
Name=Two Tone Splatter
Info=The Two Tone Splatter Spraycan sprays dots of the primary and secondary colors that build up. The tool type is not available for black and white pictures. Paper type is ignored.
Help=7854
Width=40
Method=11
FlowRate=100
2Splatter=1
[5]
ID=7
Name=Basic Paintbrush
Info=The Basic Paintbrush draws soft-edged lines that use the paper type. The effect is most apparent on 24 bit and gray scale pictures.
Help=7839
Width=25
Tip=4
Pressure=80
Trans=30
Spacing=18
[6]
ID=7
Name=Flat Color
Info=The Flat Color Paintbrush draws hard-edged lines that ignore the paper type. This tool type is useful to paint freehand lines.
Help=7839
Width=20
Spacing=1
Method=10
[7]
ID=7
Name=Two Tone
Info=The Two Tone Paintbrush draws soft-edged lines that use the paper type. The color varies between the primary and secondary colors.
Help=7839
Width=20
Tip=4
Pressure=80
Trans=20
DynColor=9
Spacing=15
[8]
ID=7
Name=Wash
Info=The Wash Paintbrush draws lines with diluted paint. The soft-edged lines use the paper type. The effect is most apparent in 24 bit and gray scale pictures.
Help=7839
Width=30
Tip=5
Pressure=80
Trans=96
Spacing=15
[9]
ID=7
Name=Neon
Info=The Neon Paintbrush draws soft-edged lines that use the paper type and build up white in the center as you brush over an area. This tool type works best on dark areas in 24 bit pictures.
Help=7839
Width=20
Tip=4
Method=2
Pressure=80
Trans=20
Spacing=15
[10]
ID=7
Name=Rainbow
Info=The Rainbow Paintbrush draws soft-edged lines that use the paper type. The color cycles through the colors of the rainbow.
Help=7839
Width=25
Tip=4
Pressure=80
DynColor=8
[11]
ID=7
Name=Wet Oil Paint
Info=The Wet Oil Paintbrush draws soft-edged lines that use the paper type. The selected color mixes with colors already in the picture. The right mouse button mixes just the colors already present.
Help=7839
Width=25
Tip=4
Pressure=80
Trans=20
Bleed=90
RBleed=100
[12]
ID=7
Name=Jitter
Info=The Jitter Paintbrush draws lines of scattered spots that use the paper type. Use Tool Options and adjust spacing to set how far the spots are scattered.
Help=7839
Width=25
Tip=4
Pressure=80
Trans=30
Spacing=18
Jitter=100
[13]
ID=7
Name=Jitter Two Tone
Info=The Jitter Two Tone Paintbrush draws lines of scattered spots that use the paper type. The colors vary between the primary and secondary colors. Use Tool Options and adjust spacing to set how far the spots are scattered.
Help=7839
Width=20
Tip=4
Pressure=80
Trans=20
DynColor=9
Spacing=15
Jitter=100
[14]
ID=7
Name=Jitter Rainbow
Info=The Jitter Rainbow Paintbrush draws lines of scattered spots that use the paper type. The colors begin with the primary or secondary color and cycle through the hues of the rainbow.
Help=7839
Width=25
Tip=4
Pressure=80
DynColor=8
Jitter=100
[15]
ID=7
Name=Soft
Info=The Soft Paintbrush draws anti-aliased lines that ignore the paper type. The effect is most apparent in 24 bit and gray scale pictures.
Help=7839
Width=25
Tip=3
Trans=30
Spacing=18
Grainy=0
[16]
ID=8
Name=Color Replacer
Info=The Color Replacer replaces the primary color with the secondary color. Adjust the colors that are replaced by changing the Range or Color Tolerance values. Paper type is ignored.
Help=7852
Width=20
Method=30
Spacing=50
[17]
ID=9
Name=Basic Eraser
Info=The Basic Eraser draws lines using the background color. The lines have soft edges and ignore the paper type.
Help=7851
Width=40
Tip=6
Grainy=0
Spacing=18
[18]
ID=9
Name=Bleach
Info=The Bleach Eraser draws lines bleaching to white. The lines have soft edges and use the paper type. The effect is most apparent in 24 bit and gray scale pictures.
Help=7851
Width=30
Method=2
Tip=2
Trans=50
Pressure=70
Threshold=0
[19]
ID=9
Name=Hard
Info=The Hard Eraser draws lines using the background color. The lines have hard edges and ignore the paper type.
Help=7851
Width=40
Spacing=1
Method=10
[20]
ID=9
Name=Soft Bleach
Info=The Soft Bleach Eraser draws lines bleaching to white. The lines have very soft edges and ignore the paper type. The effect is most apparent in 24 bit and gray scale pictures.
Help=7851
Width=30
Method=2
Tip=2
Trans=50
Pressure=70
Threshold=0
Grainy=0
[21]
ID=20
Info=The Local Undo tool undoes recent changes to areas of your picture. Choose this tool after you change your picture so you can undo any changes you might not like. Paper type is ignored.
Name=Local Undo
Help=7849
Width=20
Method=31
Spacing=25
[22]
ID=50
Name=Blend
Info=The Blend Paintbrush smoothes areas. Use this tool instead of the Blend filter if you want to smooth only a small area. Paper type is ignored.
Help=7868
Width=15
Method=23
Amount=25
Spacing=50
[23]
ID=52
Name=Brighten
Info=The Brighten Paintbrush lightens and darkens areas, similar to dodging and burning when printing a photograph. Only the first pass changes the area. Adjust Amount to increase or decrease the effect. Paper type is ignored.
Help=7866
Width=15
Method=21
Amount=25
Spacing=50
[24]
ID=54
Name=Contrast
Info=The Contrast Paintbrush adjusts contrast in small areas. Only the first pass changes the area. Adjust Amount to increase or decrease the effect. Paper type is ignored.
Help=7865
Width=15
Method=20
Amount=25
Spacing=50
[25]
ID=58
Name=Basic Smudge
Info=The Basic Smudge Paintbrush smudges areas using the colors you drag over. Paper type is ignored.
Help=7870
Width=15
Bleed=100
Tip=5
Pressure=80
Trans=20
Spacing=25
RandomTexture=1
Soft=0
[26]
ID=58
Name=Mix
Info=The Mix Smudge Paintbrush lightly smudges areas using the colors you drag over. Paper type is used.
Help=7870
Width=15
Tip=4
Pressure=80
Trans=20
Bleed=100
[27]
ID=58
Name=Glaze
Info=The Glaze Smudge Paintbrush smears the colors you drag over, giving the appearance of an uneven glaze. Paper type is used.
Help=7870
Width=15
Bleed=100
Tip=4
Pressure=70
Trans=70
Spacing=25
[28]
ID=58
Name=Grainy
Info=The Grainy Smudge Paintbrush scatters the colors you drag over. Paper type is ignored.
Help=7870
Width=15
Method=25
FlowRate=100
Spacing=25
[29]
ID=58
Name=Sprinkle
Info=The Sprinkle Smudge Paintbrush spreads the colors you drag over. It looks like scattered water drops. Paper type is used.
Help=7870
Width=15
Tip=4
Bleed=100
Pressure=80
Trans=50
Jitter=100
[30]
ID=63
Name=Tint
Info=The Tint Paintbrush tints areas with the primary color. You can use it with 24 bit color and gray scale pictures. Paper type is ignored.
Help=7867
Width=15
Method=22
Spacing=50
[31]
ID=67
Name=Sharpen
Info=The Sharpen Paintbrush sharpens areas. Use this tool instead of the Sharpen filter if you want to adjust only a small area. Paper type is ignored.
Help=7869
Width=15
Amount=25
Method=24
Spacing=50
[32]
ID=69
Name=Basic Airbrush
Info=The Basic Airbrush sprays smooth, soft-edged lines that build up if you hold the tool over the same area. The effect is most apparent on 24 bit and gray scale pictures. Paper type is ignored.
Help=7853
Width=35
Tip=3
FlowRate=100
Trans=30
DynPressure=2
DynStylusTrans=1
Grainy=0
Spacing=18
[33]
ID=69
Name=Fat Tip
Info=The Fat Tip Airbrush sprays smooth, slightly soft lines that quickly build up if you hold the tool over the same area. The effect is most apparent on 24 bit and gray scale pictures. Paper type is ignored.
Help=7853
Width=30
Tip=5
FlowRate=100
Trans=30
DynPressure=2
DynStylusTrans=1
Grainy=0
Spacing=18
[34]
ID=69
Name=Feather Tip
Info=The Feather Tip Airbrush sprays smooth, soft-edged lines that build up. The lines are slightly smaller than the tool width. The effect is most apparent on 24 bit and gray scale pictures. Paper type is ignored.
Help=7853
Width=25
Tip=0
FlowRate=100
Trans=20
DynPressure=2
DynStylusTrans=1
Grainy=0
Spacing=15
[35]
ID=69
Name=Ring
Info=The Ring Airbrush sprays a pattern of diffused circles that build up if you hold the tool over the same area. The effect is most apparent on 24 bit and gray scale pictures. Paper type is ignored.
Help=7853
Width=35
Tip=7
FlowRate=100
Trans=30
DynPressure=2
DynStylusTrans=1
Grainy=0
Spacing=25
[36]
ID=69
Name=Bull's Eye
Info=The Bull's Eye Airbrush sprays a pattern of several diffused concentric circles that build up. The effect is most apparent on 24 bit and gray scale pictures. Paper type is ignored.
Help=7853
Width=35
Tip=8
FlowRate=100
Trans=30
DynPressure=2
DynStylusTrans=1
Grainy=0
Spacing=25
[37]
ID=70
Name=Basic Pen
Info=The Basic Pen paints solid, hard-edged lines that ignore pressure, transparency, and paper type.
Help=7855
Width=1
Spacing=1
Method=10
[38]
ID=70
Name=Ball Point
Info=The Ball Point Pen paints smooth, soft-edged lines that simulate a ball point pen. The effect is most apparent in 24 bit and gray scale pictures. Paper type is ignored.
Help=7855
Tip=5
Width=5
Trans=50
Pressure=70
DynPressure=2
Method=1
Grainy=0
Dspots=4
[39]
ID=70
Name=Calligraphy
Info=The Calligraphy Pen paints solid, hard-edged lines with an angled nib. You can paint pen strokes whose width varies according to the direction of the stroke. Paper type is ignored.
Help=7855
Shape=6
Width=11
Spacing=1
Method=10
[40]
ID=70
Name=Fine Point
Info=The Fine Point Pen paints soft-edged lines. The lines are smaller than the selected tool width. The effect is most apparent in 24 bit and gray scale pictures. Paper type is ignored.
Help=7855
Tip=0
Width=5
Method=1
Pressure=60
DynPressure=2
Spacing=10
Grainy=0
Dspots=2
[41]
ID=70
Name=Medium Point
Info=The Medium Point Pen paints soft-edged lines. The lines are slightly smaller than the selected tool width. The effect is most apparent in 24 bit and gray scale pictures. Paper type is ignored.
Help=7855
Tip=3
Width=5
Pressure=90
Method=1
DynPressure=2
Grainy=0
Dspots=2
[42]
ID=70
Name=Quill
Info=The Quill Pen paints soft-edged lines that fade as the quill runs out of ink. Click the mouse button again to add ink to the quill. Paper type is used.
Help=7855
Tip=4
Width=5
Pressure=70
Spacing=10
DynPressure=6
Dspots=2
[43]
ID=71
Name=Basic Charcoal
Info=The Basic Charcoal paints moderately grainy charcoal lines. Charcoal uses a darker version of the selected color. Paper type is used.
Help=7856
Width=15
Tip=3
Trans=20
Pressure=70
DynPressure=2
Jitter=10
Dspots=2
[44]
ID=71
Name=Gritty
Info=The Gritty Charcoal paints a light, grainy charcoal line. Charcoal uses a darker version of the selected color. Paper type is ignored.
Help=7856
Width=12
Tip=4
Trans=25
Pressure=45
DynPressure=2
Jitter=10
RandomTexture=1
Dspots=2
[45]
ID=71
Name=Soft
Info=The Soft Charcoal paints a smooth, soft-edged charcoal line. Charcoal uses a darker version of the selected color. Paper type is used.
Help=7856
Width=15
Tip=5
Trans=30
Pressure=70
DynPressure=2
Jitter=10
Dspots=2
[46]
ID=77
Name=Basic Color Pencil
Info=The Basic Color Pencil paints moderately smooth, soft-edged lines that smudge with the colors you are painting over. The effect is most apparent in 24 bit and gray scale pictures. Paper type is used.
Help=7858
Width=8
Method=1
Tip=3
Pressure=80
DynPressure=2
Trans=20
Dspots=2
[47]
ID=77
Name=Sharp
Info=The Sharp Color Pencil paints moderately smooth, soft-edged lines that smudge with the colors you are painting over. The lines are smaller than the selected tool width. Paper type is used.
Help=7858
Width=8
Method=1
Tip=0
Pressure=100
DynPressure=2
Dspots=2
[48]
ID=77
Name=Dull
Info=The Dull Color Pencil paints thick, soft-edged lines that smudge with the colors you are painting over. The effect is most apparent in 24 bit and gray scale pictures. Paper type is used.
Help=7858
Method=1
Width=8
Tip=5
Trans=30
Pressure=80
DynPressure=2
Dspots=2
[49]
ID=78
Name=Basic Chalk
Info=The Basic Chalk paints grainy, soft-edged chalk lines. Chalk uses a lighter version of the selected color. Paper type is used.
Help=7857
Width=25
Tip=5
Pressure=50
DynPressure=2
Jitter=10
[50]
ID=78
Name=Chalk Pastel
Info=The Chalk Pastel paints smooth, soft-edged chalk lines that gradually fade and then start using colors in the picture. Chalk uses a lighter version of the selected color. Paper type is used.
Help=7857
Width=20
Tip=4
Trans=60
Pressure=60
DynPressure=2
Jitter=10
RBleed=100
[51]
ID=78
Name=Powdery
Info=The Powdery Chalk paints smooth, soft-edged chalk lines. Chalk uses a lighter version of the selected color. Paper type is ignored.
Help=7857
Width=20
Tip=4
Trans=10
Pressure=35
DynPressure=2
Jitter=10
RandomTexture=1
[52]
ID=79
Name=Basic Marker
Info=The Basic Marker paints smooth, soft-edged lines that gradually smudge with the colors you are painting over. The effect varies slightly depending on the paper type.
Help=7859
Width=17
Method=1
Bleed=85
Tip=4
Jitter=5
Trans=60
Dspots=2
Buildup=90
Recolor=25
[53]
ID=79
Name=Highlighter
Info=The Highlighter Marker paints smooth, soft-edged lines with a high degree of transparency. The effect varies slightly depending on the paper type.
Help=7859
Method=1
Width=17
Bleed=99
Tip=5
Trans=80
Jitter=5
Buildup=90
Recolor=25
[54]
ID=79
Name=Felt Tip
Info=The Felt Tip Marker paints smooth, soft-edged lines that smudge more quickly than the Basic Marker. The effect varies slightly depending on the paper type.
Help=7859
Method=1
Width=10
Bleed=85
Tip=2
Trans=20
Jitter=5
Dspots=2
Buildup=90
Recolor=25
[55]
ID=79
Name=Smudgy
Info=The Smudgy Marker paints smooth, soft-edged lines that blend and smudge more than the other Markers. The effect varies slightly depending on the paper type.
Help=7859
Method=1
Width=17
Bleed=99
Tip=4
Trans=20
Jitter=5
Dspots=2
Buildup=90
Recolor=10
[56]
ID=79
Name=Fine Point
Info=The Fine Point Marker paints smooth, soft-edged lines that smudge. The lines are smaller than the selected tool width. The effect varies slightly depending on the paper type.
Help=7859
Method=1
Width=8
Bleed=90
Tip=0
Trans=50
Jitter=5
Dspots=2
Spacing=10
Buildup=90
Recolor=25
[57]
ID=80
Name=Basic Crayon
Info=The Basic Crayon paints grainy, soft-edged crayon marks that use the paper type. The lines are slightly smaller than the selected tool width.
Help=7860
Width=20
Method=1
Tip=3
Jitter=15
Pressure=65
DynPressure=2
Trans=10
Spacing=22
Dspots=2
Buildup=90
[58]
ID=80
Name=Dull
Info=The Dull Crayon paints dense, moderately smooth and broad crayon marks that use the paper type.
Help=7860
Width=20
Method=1
Tip=4
Jitter=15
Pressure=45
DynPressure=2
Trans=25
Spacing=22
Dspots=2
Buildup=90
[59]
ID=80
Name=Oil Pastel
Info=The Oil Pastel Crayon paints grainy, soft-edged crayon marks. The color is a lighter version of the selected color. The right mouse button smudges the colors. Paper type is used.
Help=7860
Width=17
Tip=4
Jitter=10
Pressure=60
DynPressure=2
Trans=10
Bleed=90
RBleed=100
[60]
ID=80
Name=Sharp
Info=The Sharp Crayon paints thin, soft-edged crayon marks that use the paper type. The lines are much smaller than the selected tool width.
Help=7860
Width=20
Method=1
Tip=0
Jitter=15
Pressure=75
DynPressure=2
Trans=25
Spacing=12
Dspots=2
Buildup=90
[61]
ID=80
Name=Waxy
Info=The Waxy Crayon paints moderately smooth, semi-transparent crayon marks with a very soft edge. Paper type is used.
Help=7860
Width=20
Method=1
Tip=3
Jitter=15
Pressure=50
DynPressure=2
Trans=65
Spacing=22
Dspots=2
Buildup=90
[62]
ID=65
Name=Clone
Info=The Clone tool paints using an area in a picture you have set as your source. The Rubber Stamp option automatically resets the source to the original point when you click the mouse button. Paper type is ignored.
Help=7871
Width=15
Method=50
Tip=4
Spacing=25
[63]
ID=58
Name=Smear
Info=The Smear Smudge Paintbrush smudges areas by "pushing" the pixels aside. Paper type is ignored.
Help=7870
Width=15
Method=51
Tip=4
Trans=30
Spacing=10
[64]
ID=4
Name=Eye Dropper
Info=The Eyedropper picks up colors from your picture. You can pick up a single pixel of color or a 3x3 or 5x5 average area color.
[65]
ID=16
Name=Basic Box
Info=The Basic Box tool paints hollow boxes or boxes filled with the secondary color. The border is in the primary color.
Help=7864
Width=1
Method=0
[66]
ID=16
Name=Gradient
Info=The Gradient Box tool paints boxes filled with a gradient that begins with the secondary color and ends with the background color. If you have selected the filled with border style, the border is in the primary color.
Help=7864
Width=1
Method=40
[67]
ID=16
Name=Tile
Info=The Tile Pattern Box tool paints boxes filled with a tile pattern you have loaded with the Tile Pattern command on the Options menu. If you have selected the filled with border style, the border is in the primary color.
Help=7864
Width=1
Method=41
[68]
ID=5
Name=Basic Roller
Info=The Basic Paint Roller fills an area with the primary or secondary color. Adjust the area to be filled by changing the Range or Color Tolerance values. Paper type is ignored.
Help=7861
Method=0
[69]
ID=5
Name=Gradient
Info=The Gradient Paint Roller fills an area with a gradient that begins with the secondary color and ends with the background color. Adjust the area to be filled by changing the Range or Color Tolerance values. Paper type is ignored.
Help=7861
Method=40
[70]
ID=5
Name=Tile
Info=The Tile Pattern Paint Roller fills an area with a tile pattern you have loaded with the Tile Pattern command on the Options menu. Adjust the area to be filled by changing the Range or Color Tolerance values. Paper type is ignored.
Help=7861
Method=41
[71]
ID=11
Name=Basic Line
Info=The Basic Line paints straight lines in the primary color. Hold down Shift as you drag to constrain the line. Click the right mouse button to paint lines joined end to end; Ctrl+right button paints rays. The lines ignore the paper type.
Help=7862
Width=1
Method=0
[72]
ID=11
Name=Tile
Info=The Tile Pattern Line paints lines using a tile pattern loaded with the Tile Pattern command on the Options menu. Use the Width mini-scroll bar to control the spacing of the tile pattern -- the larger the width, the more you see of the tile pattern.
Help=7862
Width=20
Method=41
[73]
ID=0
Name=Scissors
Info=The Scissors defines polygonal areas in your picture. Press Shift to constrain the sides horizontally, vertically, or at 45 degree angles. Use Image or Edit menu commands to manipulate the area.
[74]
ID=1
Name=Box Selection
Info=The Box Selection tool defines rectangular areas in your picture. Press Shift as you drag to constrain the area to a square. Use Image or Edit menu commands to manipulate the area.
[76]
ID=66
Name=Lasso
Info=The Lasso defines irregular areas in your picture. Press Shift to constrain the tool horizontally or vertically. Use Image or Edit menu commands to manipulate the area.
[77]
ID=73
Name=Wand
Info=The Magic Wand defines areas of similar hues. Adjust the area that is defined by changing the Range or Color Tolerance values. Use Image or Edit menu commands to manipulate the area.
Help=1213
[78]
ID=76
Name=Elliptical Selection
Info=The Elliptical Selection tool defines oval areas in your picture. Press Shift as you drag to constrain the area to a circle. Use Image or Edit menu commands to manipulate the area.
[79]
ID=2
Name=Hand
Info=The Hand moves a picture that is larger than the picture window. Drag with the left mouse button to move the picture vertically, horizontally, or diagonally.
Help=7848
[80]
ID=22
Name=Locator
Info=The Locator is used with duplicated picture windows. Click the left mouse button on an area in one window to quickly move to the same area in all duplicated copies of the picture.
Help=7847
[81]
ID=3
Name=Text
Info=The Text tool adds text to your picture. The text is in the secondary color. If you select a shadow or outline style, it appears in the primary color.
[82]
ID=21
Name=Zoom
Info=The Zoom tool changes the magnification of your picture. Click the left mouse button to zoom in on the picture. Click the right mouse button to zoom out on the picture.
[83]
ID=10
Name=Curve
Info=The Curve paints Bezier curves with the primary color. Click the right mouse button to paint lines joined end to end; Ctrl+right button paints rays. Paper type is ignored.
Help=7863
Width=1
[84]
ID=13
Name=Round Box
Info=The Round Box tool paints rounded boxes. The border of the box is in the primary color. If you choose a filled style, the secondary color fills the shape.
Help=7864
Width=1
[85]
ID=18
Name=Ellipse
Info=The Ellipse/Circle tool paints ovals and circles. The border of the shape is in the primary color. If you choose a filled style, the secondary color fills the shape.
Help=7864
Width=1
[86]
ID=75
Name=Regular Polygon
Info=The Regular Polygon tool paints equal-sided polygons. The border of the shape is in the primary color. If you choose a filled style, the secondary color fills the shape.
Help=7864
Width=1
[87]
ID=19
Name=Polygon
Info=The Polygon tool paints polygons. The border of the shape is in the primary color. If you choose a filled style, the secondary color fills the shape.
